{{ $t('shop.all.spaetbestellservice.hinweis') }}
- {{ ergebnis }}
-
{{ ergebnis.artikelnummer }}({{ ergebnis.artikelbezeichnung }})
{{ $t('shop.modules.login.willkommen_sis') }}
{{ $t('shop.display.bestellassistent.anmelden.bereits_kunde') }}
{{ /* Login Felder - wird verwendet im Login Modal und im "zur Kasse" Modal auf der Warenkorbseite */ }}{{ $t('shop.modules.login.anmeldung_unterbenutzer') }}
{{ /* Unterbenutzer Login Felder - wird verwendet im Login Modal und im "zur Kasse" Modal auf der Warenkorbseite */ }}{{ $t('shop.display.bestellassistent.anmelden.neu_kunde') }}
{{ anzahlArtikel }}
{{ $n(gesamtpreis, 'curprec') }}
{{ $t('shop.display.index.gespeicherter_warenkorb') }}
{{ $t('shop.display.index.hinweis_gespeicherter_warenkorb', { 'lastChange': $date(new Date(lastChange * 1000), 'datetimeMin'), 'anzahlPositionen': anzahlPositionen }) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_anzeigen') }}
{{ $n(e.anzeigeartikel.Artikelmenge, 'menge') }} {{ $t('shop.all.einheit.' + e.anzeigeartikel.Einheit) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_ausblenden') }}
Bosch-Rexroth NG 6-One-way flow control
{{ $t('shop.all.artikelnummer') }}:
Z2FS 6 B2-4X/2QV ***
{{ $t('shop.all.menge') }}
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Suitable:
NG 6 intermediate plate valves are used in combination with NG 6 directional valves. The intermediate plate valves are fitted between the directional valves and the connection plate. Each intermediate plate has a specific function, they control the strength, movement and speed of a hydraulic cylinder or a hydraulic motor.
Materials:
Body: Spheroidal cast iron, internal parts: Steel, seals: NBR
Media:
Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 10 - 500 mm²/s, alternatively: 20 - 400 mm²/s)
Operating pressure:
0 - 315 bar (alternatively: 0 - 320 bar)
Nominal flow:
up to approx. 60 l/min depending on the valve used (request pressure loss curves if required), we recommend usage up to approx. 40 l/min
Note:
The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.
Scope of delivery:
Valve including seals, without screws.
NG 6 intermediate plate valves are used in combination with NG 6 directional valves. The intermediate plate valves are fitted between the directional valves and the connection plate. Each intermediate plate has a specific function, they control the strength, movement and speed of a hydraulic cylinder or a hydraulic motor.
Materials:
Body: Spheroidal cast iron, internal parts: Steel, seals: NBR
Media:
Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 10 - 500 mm²/s, alternatively: 20 - 400 mm²/s)
Operating pressure:
0 - 315 bar (alternatively: 0 - 320 bar)
Nominal flow:
up to approx. 60 l/min depending on the valve used (request pressure loss curves if required), we recommend usage up to approx. 40 l/min
Note:
The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.
Scope of delivery:
Valve including seals, without screws.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Version | Bosch-Rexroth |
| function | One-way flow control** |
| affected flow rate | B |
| Clamping length [mm] | 40 |
| Temperature range [°C] | -20 to +80 |
{{ $t('shop.display.artikel.info') }} Z2FS6B2-4X/2QV
| {{ $t('shop.all.gewicht') }} | 1.000 g / pcs |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84812010 |
| {{ $t('shop.all.hersteller') }} | Bosch-Rexroth |
{{ $t('shop.all.dokumente') }}
{{ $t('shop.all.unverbindliche_richtwerte') }}
Accessories
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred!
An error has occurred, please reload this page and try again.